=============================
Current Version Info
=============================
Build Version: 1.1


=============================
How To Install the MaxTel USB Data Fax Voice Modem
=============================

Once you have pluged in the MaxTel USB modem into your system,
Windows/95/98/2000 will recognize the MaxTel USB modem as a new device
for which it has no built-in support.(Note: Your windows 95 must be
upgraded to support universal serial bus devices.) Since it does not
recognize the device, it will display the new device dialog and will
prompt you to search for a driver for the new device. You should insert
the 'ASONIC USB56 Data Fax Voice Modem Install Diskette' and press NEXT.

The Install Wizard will search the diskette and find the drivers
for the USB modem . Select the "MaxTel V.90 HardWare USB Modem" and
continue. After installing USB Drivers, The Install Wizard will find
another new device, then you should select the install diskette and press
NEXT, The Wizard will find the "MaxTel USB Data Fax Voice Modem" and
continue. Windows will copy the files to their proper directories,
Installation will also make several additions to the Registry
to support the MaxTel USB Modem files. When the installation completes,
the driver will automatically select the best COM port for the ASONIC
USB56 Modem.


=============================
What is added to my system?
=============================

The following files will be copied to your system during the installation:

\Windows\UNMTUSB.EXE    - MaxTel USB Modem Remove Device utility
        This applet is only used at uninstall time to remove the ASONIC USB56
        modem device from the Windows 95/98 system tree.  This application
        performs the same function as the following steps:

        - Open the Control Panel folder from the Start menu
        - Start the 'Add/Remove Programs' wizard
        - Select the Uninstall MaxTel USB Data Fax Voice modem in the list
        - Click 'Remove' to remove the device

        The UNMTUSB utility is run when the user clicks
        'Uninstall' on the Uninstall property page.

\Windows\USBUTIL.EXE    - MaxTel USB Modem COM port setting utility
        The USBUTIL utility is run when the user clicks the file,
        user can set the COM port available in win9x system for the
        USB modem.

\Windows\System\BULKUSB.SYS - MaxTel USB interface driver
        This is the driver file which contains the Windows driver code
        for USB interface controlling.

\Windows\System\BULKUSB.LIB - MaxTel USB interface driver Library
        This is the library file which supports BULKUSB.SYS driver file

\Windows\System\USBMDM.VXD - MaxTel main modem driver
        This is the main driver file which contains all of the modem Layer 2
        protocol/compression/data flow software and the Windows driver
        interface code. 

\Windows\System\USBPNP.VXD - MaxTel USB Add New Modem Device Driver
        This driver acts as the central repository for adding new modem
        device dialog for installing the MT3029-USB Data Fax Voice Modem
        driver when you finish installing the USB part drivers. 

\Windows\INF\MTUSB.INF
        This is a copy of the install information file that tells Windows
        about our Universal Serial Bus Device.  It is copied to the hard
        drive during installation

\Windows\INF\USBMDM.INF
        This is a copy of the install information file that tells Windows
        about our Modem Device.  It is copied to the hard drive during
        installation. It also supports UNINSTALL capability for the support
        applets and driver files.



=============================
To UNINSTALL the MaxTel USB Data Fax Voice Modem
=============================

1) Remove the MaxTel USB drivers from Windows

-  Open the Control Panel Add/Remove Programs wizard.
      (Start->Control Panel->Add/Remove Programs)
-  Click on the 'Uninstall MaxTel USB Data Fax Voice Modem' item
   to open the uninstall property page.
-  Press the 'Uninstall' button.
-  Follow the on-screen instructions.
-  The Driver is auto deleted from your windows dictionary and associated
   information in the windows registry is removed.
-  unplug your MaxTel USB Modem from the USB cable.



=============================
Hardware Detection
=============================

Windows 95/98/2000 can't add the MaxTel USB modem with the Control Panel's
Modem Wizard because MaxTel is a USB HOT Plug-n-Play device.  There are
two valid methods for redetecting your USB hardware if you have uninstalled
the drivers but have not yet rebooted.

1) Unplug your MaxTel USB Modem from the USB cable and plug in again !

2) Just reboot.  Windows will prompt you for MaxTel USB drivers at reboot time.

