/*
 INSTALL.DAT

 Project: TurboDLDClassic
 Version: 2.1

*/

// To place a @pause in the center of the display page,
// space in 38 spaces and then type @pause.  To make sure
// that the @pause is at the bottom of the display, the
// @pause should be at line 21 or better of the display.

// Standard header here...

@DefineProject
	@Name = "TurboDLDClassic"
	@Version = "2.1"
	@Subdir = "\\ACAD\\DRV"
	@OutDrive = C
	@Group = "A"
	@InDiskBell = 1
@EndProject

// Define all the vars you need here
// Init all strings with "" or a hard coded string
// Init all Integers with 0 or 1

// If OEM release, set @IsOem = 1 else 0

@DefineVars
	@Integer @DDrive = 99
	@Integer @StrLens = 0
	@Integer @bannercol = 0
	@Integer @OurCol = 0
	@Integer @XX = 0
	@Integer @IsOem = 1
	@Dir @AcadDir  = "\\ACAD\\DRV"
	@Drive @AcadDrive  = C
	@qstring @redprogram = "TURBODLD.RED"
	@qstring @thisprogram = "RCTURBOC.EXP"
	@qstring @namethisprogram = "TurboDLD-Classic"
	@qstring @helpcontact = "Panacea Inc"
	@qstring @registration = ""
	@qstring @registrationname = ""
	@qstring @companyname = ""
	@qstring @regreturn = ""
	@qstring @ourhomeexp = ""
	@qstring @ourhomered = ""
	@qstring @tempstring = ""
	@qstring @bannername = " T u r b o D L D   I n s t a l l "
@EndVars

// setup some of the local var defs

// Used to display the banner on all screens

@xx = @strlen("@bannername")
@bannercol = (38 - @xx/2)

// used to check for Write Protect on floppy

@If (@IsOem == 1)
   @goto OEM1
@Endif

@If (@InDrive == A)
   @xx = @homedrive(0)
@ElseIf (@InDrive == B)
   @xx = @homedrive(1)
@EndIf

@If (@xx == 1)          // if error found ...

@tempstring = " Install must have write access to your @namethisprogram "
@xx = @strlen(@tempstring)
@ourcol = (38 - @xx/2)

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@MoveCStr(2, @bannercol, 48, @bannername)

  @movecstr(7,13,79,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
  @movecstr(7,31,207," W A R N I N G ")
  @movecstr(8,13,79,"Ί                                                 Ί")
  @movecstr(9,13,79,"Ί                                                 Ί")
  @movecstr(9,15,79," The diskette in Drive @InDrive is ")
  @movecstr(9,43,78," -WRITE PROTECTED- ")
  @movecstr(10,13,79,"Ί                                                 Ί")
  @movecstr(11,13,79,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")

  @movecstr(15,@ourcol,31, @tempstring)
  @movecstr(16,@ourcol,31," diskette in order to continue. ")

  @movecstr(19,@ourcol,31," Press any key to exit to DOS, unprotect the ")
  @movecstr(20,@ourcol,31," @namethisprogram diskette and then run INSTALL again. ")

  @move(22,0)
  @waitkey
  @exit

@Endif

// get the correct string for the EXP and the RED files

OEM1:

@ourhomeexp = @wherearewe(@thisprogram)

@ourhomered = @wherearewe(@redprogram)

@tempstring = " utility for @namethisprogram ! "
@xx = @strlen(@tempstring)
@ourcol = (40 - @xx/2)


@If (@IsOem == 1)
   @goto OEM1A
@Endif

@movecstr(0,0,63,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(1,0,63,"Ί                                                                            Ί")
@movecstr(2,0,63,"Ί                                                                            Ί")
@movecstr(3,0,63,"Ί                                                                            Ί")
@movecstr(3,25,48," Welcome to the installation ")
@movecstr(4,0,63,"Ί                                                                            Ί")
@movecstr(4,@ourcol,48,@tempstring)
@movecstr(5,0,63,"Ί                                                                            Ί")
@movecstr(6,0,63,"Ί                                                                            Ί")
@movecstr(6,33,49,"Panacea Inc.")
@movecstr(7,0,63,"Ί                                                                            Ί")
@movecstr(7,28,49,"  600 Suffolk Street")
@movecstr(8,0,63,"Ί                                                                            Ί")
@movecstr(8,26,49,"  Lowell, Massachussetts")
@movecstr(9,0,63,"Ί                                                                            Ί")
@movecstr(9,34,49,"01854 USA")
@movecstr(10,0,63,"Ί                                                                            Ί")
@movecstr(11,0,63,"Ί                                                                            Ί")
@movecstr(11,30,63,"Phone: 508-937-1760")
@movecstr(12,0,63,"Ί                                                                            Ί")
@movecstr(12,31,63,"FAX: 508-970-0199")
@movecstr(13,0,63,"Ί                                                                            Ί")
@movecstr(13,31,63,"BBS: 603-432-5193")
@movecstr(14,0,63,"Ί                                                                            Ί")
@movecstr(15,0,63,"Ί                                                                            Ί")
@movecstr(15,36,62,"E-Mail:")
@movecstr(16,0,63,"Ί                                                                            Ί")
@movecstr(16,28,62,"Tech_Support@@panacea.com")
@movecstr(17,0,63,"Ί                                                                            Ί")
@movecstr(18,0,63,"Ί                                                                            Ί")
@movecstr(19,0,63,"Ί                                                                            Ί")
@movecstr(20,0,63,"Ί                                                                            Ί")
@movecstr(21,0,63,"Ί                                                                            Ί")
@movecstr(22,0,63,"Ί                                                                            Ί")
@movecstr(23,0,63,"Ί                                                                            Ί")
@movecstr(24,0,63,"Ί                                                                            Ί")
@movecstr(25,0,63,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")

@goto OEM1ADONE

OEM1A:

@movecstr(0,0,63,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(1,0,63,"Ί                                                                            Ί")
@movecstr(2,0,63,"Ί                                                                            Ί")
@movecstr(3,0,63,"Ί                                                                            Ί")
@movecstr(3,25,48," Welcome to the installation ")
@movecstr(4,0,63,"Ί                                                                            Ί")
@movecstr(4,@ourcol,48,@tempstring)
@movecstr(5,0,63,"Ί                                                                            Ί")
@movecstr(6,0,63,"Ί                                                                            Ί")
@movecstr(7,0,63,"Ί                                                                            Ί")
@movecstr(8,0,63,"Ί                                                                            Ί")
@movecstr(8,32,63,"Developed by:")
@movecstr(9,0,63,"Ί                                                                            Ί")
@movecstr(10,0,63,"Ί                                                                            Ί")
@movecstr(10,33,49,"Panacea Inc.")
@movecstr(11,0,63,"Ί                                                                            Ί")
@movecstr(11,28,49,"  600 Suffolk Street")
@movecstr(12,0,63,"Ί                                                                            Ί")
@movecstr(12,26,49,"  Lowell, Massachussetts")
@movecstr(13,0,63,"Ί                                                                            Ί")
@movecstr(13,34,49,"01854 USA")
@movecstr(14,0,63,"Ί                                                                            Ί")
@movecstr(15,0,63,"Ί                                                                            Ί")
@movecstr(16,0,63,"Ί                                                                            Ί")
@movecstr(17,0,63,"Ί                                                                            Ί")
@movecstr(18,0,63,"Ί                                                                            Ί")
@movecstr(19,0,63,"Ί                                                                            Ί")
@movecstr(20,0,63,"Ί                                                                            Ί")
@movecstr(21,0,63,"Ί                                                                            Ί")
@movecstr(22,0,63,"Ί                                                                            Ί")
@movecstr(23,0,63,"Ί                                                                            Ί")
@movecstr(24,0,63,"Ί                                                                            Ί")
@movecstr(25,0,63,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")

OEM1ADONE:

@OurPause

@Display
   @cls
@EndDisplay

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@MoveCStr(2, @bannercol, 48, @bannername)

@movecstr(6,5,31,"Thank you for purchasing @namethisprogram from Panacea, Inc.")
@movecstr(8,5,31,"This utility program registers your copy of @namethisprogram and")
@movecstr(9,5,31,"installs the software into the correct directory or sub-directories.")
@movecstr(11,5,31,"If you have any questions regarding this process, please refer to")
@movecstr(12,5,31,"your @namethisprogram Installation Guide, in particular, Chapter 1,")
@movecstr(13,5,31,"[Quick Start] and Chapter 3, [Installing and Configuring].")
@movecstr(15,5,31,"If you are installing for 3D Studio only, install as though you")
@movecstr(16,5,31,"are using AutoCAD Release 10 or 11 and the follow configuration")
@movecstr(17,5,31,"instructions in the [Rendering With TurboDLD] chapter of your") 
@movecstr(18,5,31,"@namethisprogram Installation Guide.")


@Display
@move(21,0)
   @pause
@enddisplay

@If (@IsOem == 1)
   @goto OEM2
@Endif

// First thing to do is to check the software and 
// register it if need to..

@regreturn = @ckregisterinfo(@ourhomeexp)

@If (@strlen("@regreturn") == 0)
    @GoTo Not_Registered
@Endif

@If (@strfind(@regreturn, "ERROR") == -1)
    @GoTo Show_Registered
@Endif

// If here, there must have been an error 

ShowError:

@xx = @strlen(@regreturn)
@ourcol = (40 - @xx/2)
// adjust for junk on the end of the string
@xx = (@xx - 1)

@Display @Cls
@move(4,0)
	There was an error detected by the install software.

	The error was:

@movecstr(10,@ourcol,30,@strhead("@regreturn", @xx))

@move(12,0)
	Please insure that you have the correct files on your disk.

	If you need help, please contact @helpcontact.
@move(21,0)
   @pause
@Exit
@enddisplay

// If we are here then the software has been registered

Show_Registered:

@regreturn = @ckregisterinfo(@ourhomeexp)

// Clear the options out
@clearoption(1)
@clearoption(2)

@xx = @strlen(@regreturn)
@ourcol = (38 - @xx/2)

@GetOption
@LocalWindow(18,40)

@movecstr(1,22,79,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,22,79,"Ί                             Ί")
@movecstr(2,24,78,"This Copy Is Registered To:")
@movecstr(3,22,79,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")

@movecstr(7,@ourcol,30,@strhead("@regreturn", @xx))

@move(9,0)
	   The program has been installed and is protected by federal
	   copyright laws.  If you need additional copies of this software 
	   please contact @helpcontact.

	 @Option 1 = "Continue"
	 @Option 2 = "Exit Install"

@EndOption

@If(1 [= @Option)
   @Goto Get_Acad
@Else
   @Exit
@Endif

Not_Registered:

@getstring @registration

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@MoveCStr(2, @bannercol, 48, @bannername)

@LocalWindow(13,40)

@movecstr(7,3,31,"Please type in your Full Name as you wish it to appear for registration")
@movecstr(8,3,31,"purposes. For Corporate installations, you may wish to enter the name of")
@movecstr(9,3,31,"your CAD Manager.")

@movecstr(18,8,31,"Note: The total combined length of [Your Name] and, from the")
@movecstr(19,8,31,"      next screen, [Company Name] cannot exceed 64 characters.")
@movecstr(20,8,31,"      If the total is longer, [Company Name] will be truncated.")

@prompt = "    Please Enter Your Full Name    "

@EndString

// get the length of the string so-far

@strlens = (64 - @strlen("@registration"))

@getstring @companyname

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@MoveCStr(2, @bannercol, 48, @bannername)

@LocalWindow(13,40)

@movecstr(7,14,31,"Please type in your Company Name as you would like")
@movecstr(8,14,31,"to have it appear for registration purposes.")

@movecstr(18,9,31,"Note: You have @strlens characters available for [Company Name].")
@movecstr(19,9,31,"      If you enter a Company Name longer than @strlens characters,")
@movecstr(20,9,31,"      the additional information will be truncated.")


@prompt = "    Please Enter Your Company Name    "

@EndString

@registrationname = "@registration, @companyname"

// Clear the options out
@clearoption(10)
@clearoption(20)

@xx = @strlen(@registrationname)
@ourcol = (40 - @xx/2)

@GetOption

@LocalWindow(18,40)

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@Movecstr(2, @bannercol, 48, @bannername)

@movecstr(8,18,31,"You have entered the following information:")

@movecstr(12, @ourcol, 62, @registrationname)


	 @Option 10 = "Information Correct"
	 @Option 20 = "Information Not Correct"

@EndOption

@If(20 [= @Option)
   @Goto Not_Registered
@Endif

// NULL out the string b4 using again

@tempstring = ""

// If we are here, do the registration ....

@regreturn = @registerit(@registrationname @ourhomeexp)

@If (@strfind(@regreturn, "ERROR") != -1)
    @GoTo ShowError
@Endif

OEM2:

Get_Acad:

@GetOutDrive @AcadDrive


	Install needs to know which drive you would like to copy 
	@namethisprogram files to. Please select an available 
	drive from the list below.

    @LocalWindow(16,56)   
  
	Use the [Up Arrow], [Down Arrow], 
	[Pg Up], & [Pg Dn] keys to highlight 
	your selection and then press the 
	[Enter] key to continue.
  
@EndOutDrive

// clear the options first
@clearoption(1000)
@clearoption(2000)

@GetOption @cls
@LocalWindow(14,40)

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@Movecstr(2, @bannercol, 48, @bannername)

@move(8,0)
	      Please enter the Version of AutoCAD you are running:

	@Option 1000 = " Release 12 or 13 "
	@Option 2000 = " Release 10 or 11 "

@EndOption

@If(2000 [= @Option)
   @AcadDir = "TURBODLD"
@EndIf

@GetSubDir @AcadDir
@Cls
@LocalWindow(14,40)

@If(1000 [= @Option)

@movecstr(3,5,31,"You have chosen to install @namethisprogram for AutoCAD Release 12/13.")
@movecstr(4,5,31,"We recommend installing into the DRV sub-directory off of your main")
@movecstr(5,5,31,"AutoCAD sub-directory. Please enter your ACAD\\DRV sub-directory name")
@movecstr(6,5,31,"below.")
@movecstr(8,5,31,"You may also install @namethisprogram into its own sub-directory, to")
@movecstr(9,5,31,"do so, enter an alternate sub-directory name. If the sub-directory does")
@movecstr(10,5,31,"not exist, @namethisprogram Install will create it for you.")
@movecstr(19,5,31,"Please note that if you install @namethisprogram into an alternate")
@movecstr(20,5,31,"sub-directory you will have to alter your ACADDRV environment variable")
@movecstr(21,5,31,"to include the @namethisprogram sub-directory.")

@Else

@movecstr(6,5,31,"You have chosen to install @namethisprogram for AutoCAD Release 10")
@movecstr(7,5,31,"or 11. Enter a sub-directory name on @AcadDrive: for @namethisprogram")
@movecstr(8,5,31,"files. If the sub-directory does not exist, @namethisprogram Install")
@movecstr(9,5,31,"will create it for you.")

@EndIf

@EndSubDir

// Clear the options out
@clearoption(10)
@clearoption(20)

@If (@DirExists("@AcadDrive:\\@AcadDir"))
  @GoTo Report
@Else
  @GetOption
  @LocalWindow(12,40)
	@AcadDir path was not found on @AcadDrive.
	
	Would you like to create @AcadDir at this time?


	 @Option 10 = "Yes, create the path"
	 @Option 20 = "No; re-enter the information"

  @EndOption
@Endif

@tempstring = " Creating @AcadDrive:@AcadDir, please stand-by ! "
@xx = @strlen(@tempstring)
@ourcol = (40 - @xx/2)

@If(10 [= @Option)
   @Display @Cls
      @movecstr(12,@ourcol,48,@tempstring)
   @MkDir("@AcadDrive:@AcadDir")
   @EndDisplay
   @Goto WeBuiltPath
@Else
   @Goto Get_Acad
@Endif

// Now we know where to install TURBODLD, tell the user whats going on

Report:

@clearoption(10)
@clearoption(20)

@tempstring = " @AcadDrive:@AcadDir exists, do you wish to use it? "
@xx = @strlen(@tempstring)
@ourcol = (38 - @xx/2)

@Getoption
@localwindow(14,40)

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@Movecstr(2, @bannercol, 48, @bannername)

@movecstr(9,@ourcol,48,@tempstring)
	 @Option 10 = "Yes, Continue"
	 @Option 20 = "No; re-enter the information"
@Endoption

@If(20 [= @Option)
   @Goto Get_Acad
@Endif

// we get here from building the dir\sub-dir and not asking if they want to use it.

WeBuiltPath:

// Test the amount of free room left on the dest drive

@Display @Cls

   @if (@diskfree(@AcadDrive) < 1200000)

      @move(7,0)
      The selected output disk drive only has @diskfree(@AcadDrive) bytes.

      @namethisprogram requires a minumum of 1.2mb.

      The Install program will now exit, please correct this problem

      and re-run the Install program.
      @move(21,0)
	 @pause
      @exit
   @endif
@enddisplay

// Clear the options out
@clearoption(10)
@clearoption(20)

@tempstring = " @AcadDrive:@AcadDir "
@xx = @strlen(@tempstring)
@ourcol = (40 - @xx/2)

@movecstr(12,@ourcol,63,@tempstring)

@tempstring = " @Name will be installed in: "
@xx = @strlen(@tempstring)
@ourcol = (40 - @xx/2)

@GetOption

@LocalWindow(17,40)

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@Movecstr(2, @bannercol, 48, @bannername)

@movecstr(8,@ourcol,63,@tempstring)
	 @Option 10 = "Yes, this is the correct path"
	 @Option 20 = "No; re-enter the information"
@endoption

@If(10 [= @Option)
   @Goto Start_Copy
@Else
   @Goto Get_Acad
@Endif

Start_Copy:

@Display

// First check if this is v10 or 11

@If(2000 [= @Option)
//        Creating FASTACAD.BAT and PANA3DS.BAT files, please stand-by

   @Write("@AcadDrive:\\@AcadDir\\FASTACAD.BAT", "wt", "SET DLDCFG=@AcadDrive:\\@AcadDir\n")
   @Write( , , "SET DSPADI=@AcadDrive:\\@AcadDir\\@thisprogram\n")
   @Write( , , "SET RDPADI=@AcadDrive:\\@AcadDir\\@thisprogram\n")
   @Write( , , "SET RCPADI=@AcadDrive:\\@AcadDir\\@thisprogram\n")
@Else
//                  Creating PANA3DS.BAT file, please stand-by
@EndIf

@Write("@AcadDrive:\\@AcadDir\\PANA3DS.BAT", "wt", "SET DLDCFG=@AcadDrive:\\@AcadDir\n")
@Write( , , "SET RCPADI=@AcadDrive:\\@AcadDir\\@thisprogram\n")

@enddisplay

// This part is a DOS style copy ...

@tempstring = "Processing @namethisprogram Install information -- Please Wait."
@xx = @strlen(@tempstring)
@ourcol = (40 - @xx/2)

@Display

@movecstr(1,8,62,"ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»")
@movecstr(2,8,62,"Ί                                                           Ί")
@movecstr(3,8,62,"ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ")
@Movecstr(2, @bannercol, 48, @bannername)

@move(6,0)
			  R e g i s t e r   T o d a y !

       Help us keep you up-to-date with the latest and greatest Panacea
       products.  Be sure to fill out and return your @namethisprogram
       registration card today.  As a registered Panacea software user,
       you will receive advance notice of new products and upgrades
       as well as preferred customer pricing.

  @move(21,0)
     @pause

@movecstr(16,@ourcol,63,@tempstring)

@copy("@ourhomeexp", "@AcadDrive:\\@AcadDir\\@thisprogram")

@enddisplay

@DefineDisk
   @Label = "Disk #1"
   @BeginLib @ourhomered
       @File *.* @Out @AcadDrive:\\@AcadDir\\*.*
   @EndLib
@EndDisk

@If(2000 [= @Option)
  @Finish @cls
   @move(2,0)
     You have successfully installed @namethisprogram for use with 
     AutoCADRelease 10 or 11. Before you can use @namethisprogram you 
     must run the FASTACAD.BAT file copied to your @AcadDrive:@AcadDir 
     sub-directory and then reconfigure AutoCAD to use @namethisprogram.
     You may wish to add FASTACAD.BAT to your AutoCAD start-up file.

     To reconfigure AutoCAD to use @namethisprogram start AutoCAD and
     select the "P386 ...." display option and then follow the
     on-screen directions.

     Thank you again for using @namethisprogram. We appreciate your
     support and welcome any comments you may have concerning our
     products. To register this software and be eligible for discounts
     on upgrades and other Panacea products, you may contact us by phone
     at 508-937-1760, or by Fax at 508-970-0199. For Technical Support,
     please refer to your Users Manual or READ.ME file.

  @move(21,0)
     @pause

  @EndFinish

@Else
  @Finish @cls
     You have successfully installed @namethisprogram for AutoCAD
     Release 12/13.  Before you can use @namethisprogram you must
     reconfigure AutoCAD. To reconfigure, start AutoCAD with "ACAD -r"
     and change the current display device. Choose @namethisprogram
     from the list of available display drivers and then follow the
     on-screen instructions. Refer to your @namethisprogram
     Installation Guide for detailed configuration instructions.

     If you have chosen to install @namethisprogram into a sub-directory
     other than ACAD\DRV, you must append the following path to your
     "SET ACADDRV=...." environment variable.  
	     
				 @AcadDrive:@AcadDir

     Thank you again for using @namethisprogram.  We appreciate your
     support and welcome any comments you may have concerning our
     products. To register this software and be eligible for discounts
     on upgrades and other Panacea products, you may contact us by phone
     at 508-937-1760, or by Fax at 508-970-0199. For Technical Support,
     please refer to your Users Manual or READ.ME file.

  @move(21,0)
     @pause

  @EndFinish
@EndIf

// end-of-file

