=======================================================================
Stealth 64                                                   README.TXT
=======================================================================


Release Notes
-------------
This is v1.03 of the Stealth 64 Install/Utilities/Drivers disk set.


Windows Installation Notes
--------------------------
Use the INSTALL program to install the Windows 3.1 drivers from DOS
or from the Windows Program Manager.

*  Suggestion:  If you are upgrading from a previous version of the
   Diamond InControl Tools, you should install from DOS, not from
   within Windows.
                  
*  Suggestion:  When running the Windows install use MS VGA  
   to eliminate any OEM files that could create a conflict.

*  When running a windows install, if the install says 
   "file in use, abort/continue" and the file in question is 
   a font (*.FON) file, continue the install.

*  If strange errors occur and text is missing from dialogs,
   check for .VBX files in your \WINDOWS directory.  .VBX files
   should only reside in the \WINDOWS\SYSTEM sub-directory.

Once the driver launches Windows, you will be placed in 640x480
256-color mode and prompted to select your monitor type.  Select 
the brand monitor you have, compatible type, or use the Custom 
Monitor Timings to create your own configuration and custom 
screen centering.

*  If Windows only comes up in VGA regardless of what resolution you
   have chosen, make sure you are changing your resolution through 
   DESKTOP (DESKTOP Size / VIEWPORT Size) NOT through DISPLAY.  

*  Only resolutions that have been selected as supported in the
   DISPLAY MODULE will be available in the VIEWPORT choices.  If
   your monitor can display a resolution provided by the card,
   go to Display and select a monitor that offers that mode and
   refresh, or select USER DEFINED MONITOR Timings and Add the mode.

*  Icon fonts are controlled by InControl Tools.  When changing
   modes back to VGA or a non-Diamond driver, these settings
   still remain.  To change back to default icon font, search
   the WIN.INI file for the IconTypeFace, IconTypeStyle, and
   IconTypeSize lines.  Place a semicolon (;) in front of these
   lines or remove the lines entirely.

*  If Windows only displays a single alphabetic character for the
   icon font, select a different font from the list of InControl
   Tools.  Windows may not support the font type/size requested
   in the resolution and resource size displayed.

*  If you had screen savers loaded previously, and they seem not
   to load on startup any longer, see the message at the top 
   regarding backing up important files and the limitation down
   below of LOAD= line being replaced and not appended.  This is
   a limitation of the Windows 3.xx SETUP program. This does not
   occur with the Diamond install.


Trouble Shooting Suggestions
----------------------------

*  If you are experiencing random lock-ups in Windows you can add the
   following line to the [STLTH64.DRV] section of the SYSTEM.INI. This
   type of lock-up may occur with applications that interogate the
   systems memory searching for virill.

     LEAVEMMIODISABLED=1  --  This is set to 0 by default.

*  If you are encountering some lock-ups during heavy DMA transfers or
   your motherboard supports bus timouts then you may try setting
   the following option in the [STLTH64.DRV] section of your SYSTEM.INI

     BUSYCHECK=ON  --  This is set to OFF by default.


Windows 3.1
-----------
The following Windows 3.1 drivers are included:

Resolution   Colors Displayed
640x480      256  65,536  16,777,216
800x600      256  65,536  16,777,216
1024x768     256  65,536  16,777,216*
1152x864     256  65,536  16,777,216*
1280x1024    256  65,536*
*4 Megabytes of onboard memory required.


    Known Limitations
    -----------------

    No graphical modes are available in a DOS Box.

    No interlaced modes are available at this time.

    Some monitors which do not support DPMS will start scrolling until
    entering into Sleep mode.

