I. PLUG & PLAY INSTALLATION

1.  Install the Plug & play Modem in an available expansion slot in your
    computer.  Refer to your computer user's manual for instructions on
    removing the computer cover and installing an add-in device.  Turn
    on your computer.

2.  Place the Plug & Play installation disk in floppy drive A or B, and
    change to the floppy drive DOS prompt by typing "a:" or "b:".  
    Type "install" and select the Quick install option.  Follow the
    screen instructions.

II. HOW TO CUSTOMIZE SIERRA PNP INSTALLATION ( SPNP ). 

1. Reconige your's device type from the list of vendor ID provided by 
   VENDID.DAT.
   SSC0000 : V32BIS MODEM WAVE FAX SPEAKER PHONE 
   SSC0004 : V32BIS MODEM WAVE FAX SPEAKER PHONE SQ3230
   SSC0005 : V32BIS MODEM WAVE FAX SPEAKER PHONE VOICE VIEW SQ3230 
   SSC0001 : QUARTET COMBO: MODEM WAVE FAX SPEAKER PHONE SOUND BLASTER
   SSC0006 : IQUARTET: QUARTET + ENHANCE IDE
   SSC0100 : V34BIS MODEM WAVE FAX SPEAKER PHONE SQ3460 
   SSC0101 : V34BIS MODEM WAVE FAX SPEAKER PHONE SQ3465
   SSC0102 : V34BIS SQ3460 
   SSC0103 : V34BIS SQ3470-3 IQUARTET OPL3
   SSC0104 : V34BIS SQ3475 IQUARTET  VOICEVIEW
   SSC0105 : V34BIS SQ3470-4 IQUARTET OPL4
   SSC0106 : V34BIS SQ3465VV VOICEVIEW

2. You can either modify a line which has a modem of your type or add in a 
   new line ( Recommend this one ) by doing following:
   
   Put your vendor ID at the beginning of a line, then the Sierra compatible
   vendor ID, uses comma as a separator.

   For example: 
   your vendor ID : BRI0A49 (V32BIS MODEM WAVE FAX SPEAKER PHONE).
   Add a new line as below to VENDID.DAT:
   
   BRI0A49,SSC0000

3. VENDID.DAT allows maximum of 15 lines. Delete some lines if they are not in 
   use.


III. HOW TO INSTALL SPNP FROM HARD DRIVE "C:"
   Xcopy installation disk onto a C:\ subdirectory. From this C:\subdirectory 
   type "Install".




